The Petzl Asap Lock is specially designed to stop a fall, slipping or an uncontrolled descent.
- Equipped with an integrated locking function, the Petzl Asap Lock can be secured above the user's attachment point on the rope. This minimises the user's fall factor.
- The Lock function prevents the rope from being pulled up by the wind.
- Also functions when the device is grabbed in a panic
- The integrated Lock function allows the Asap to remain attached to the harness when rope crossings occur, preventing the Petzl Asap Lock from potentially falling down
- Works on both vertical and sloping ropes.
- Must always be used with a fall absorber (e.g. Petzl Asap'sorber Axess) to absorb the energy of the fall by tearing the fall absorber
- Moves very smoothly with the user up or down the rope when in the "UN-Locked" function and locks immediately if a fall or uncontrolled movement occurs
- Easy and quick to install and remove at any height on the rope
- Supplied with Allen key
- Suitable for low stretch EN1891 (type A) ropes with a diameter of 10-13 mm
The Petzl Asap Lock can be ordered in the following combinations:
- Standard: 1 x Asap Lock
- Asap Lock + 1 x OK Triact Lock + Asap'sorber 20 cm (fall arrest device suitable for one person)
- Asap Lock + 1 x OK Triact Lock + Asap'sorber 40 cm (fall arrest device suitable for one person)
- Asap Lock + 1 x OK Triact Lock + Asap'sorber Axess (fall arrest device suitable for rope access and two-person rescues, among other things)
More information about these products can be found under "Downloads".
The Petzl Asap Lock is a mobile fall arresters that follows the user both up and down
The Asap Lock does not need to be disconnected from the harness during installation or removal, which prevents it from falling
Thanks to the Lock function, the Asap Lock can be locked at any point on the safety line
Suitable for use in combination with semi-static EN1891 (Type A) lanyards and energy absorbers with a diameter of 10 - 13 mm
Locks immediately in the event of a fall or uncontrolled movement
The connecting bridge is semi-permanently connected to the fall arrestor and can only be disconnected with an Allen key
| Standardization | EN 12841, EN 353-2 |
| Application | Fall protection |
| Weight | 425 Gram |
| Maximum lifespan | Unlimited |
| Warranty | 3 year |
| Maximum usage time | Unlimited |
| Suitable for | Rope (semi-static) |
| Maximum rope diameter | 13 mm |
| Minimum rope diameter | 10 mm |
| Reference numbers | B071BA00 |
Can't find your question here?
Ask it here and we will respond as soon as possible.
Post a product review yourself
Do you have this product and want to post a review?
Petzl Bm'D - Triact Lock
Price
Stock
€ 24,95
SafetyPro Static 11mm
Price
Stock
€ 2,50 € 1,65
Petzl I'D-S
Price
Stock
€ 202,25
Petzl Vertex Vent
Price
Stock
€ 71,75
Kask Plasma AQ
Price
Stock
Delivery time 5 till 7 working days
€ 63,95