Teufelberger Fimblclimb

The Teufelberger FimblCLIMB is a temporary anchor sling for professional arborists, rope access specialists, and industry settings where work positioning is required. This anchor point is certified to EN 795 B:2012, AS/NZS5532:2013, and ANSI Z133-2012 for arboricultural operations. The system is designed for single-user application and is intended solely as a temporary anchor for work positioning systems (not for fall-arrest). Usage is limited to short fall distances (maximum 500 mm) and users must be competent in application and maintenance.

The FimblCLIMB features premium materials such as a Dyneema® friction cord, a sheath made from aramid and polyester, and stainless steel fittings. The integrated retrieval thimble makes for efficient, safe removal after use.

Integrated Dyneema® friction cord
Enables reliable length adjustment but is sensitive to heat build-up. Cord must be replaced regularly in accordance with standards.

Stainless steel end-thimbles with retrieval function
Stainless steel components resist wear under frequent use and ensure smooth retrieval once disengaged from the tree.

Technical specifications

• Certification: EN 795 B:2012, AS/NZS5532:2013, ANSI Z133-2012
• Application: Work positioning (not for fall-arrest)
• User type: Single-user only
• Sheath material: Aramid/polyester
• Friction cord: Dyneema® (OD Loop 7mm)
• Rings: Stainless steel
• Minimum anchor strength: >12 kN (structural)
• Maximum new device strength: 18 kN
• Maximum fall distance: 500 mm
• OD Loop 7mm lifetime: up to 2 years (in use), total lifetime max. 5 years from production (if stored correctly)
• Inspection/service: Visual check prior to use; periodic full inspection at least annually by a competent person
• Operating temperature: Dyneema® up to 60°C, not resistant to high heat/friction
• Non-UV resistant; susceptible to frost and moisture