Our assessment found that these harnesses may present a non-conformity which cannot be detected by the test requested in our previous call for inspection. This non-conformity, combined with a specific use involving high lateral stress on the attachment point, leads to premature wear of the screws.

This wear can cause the ventral D-ring’s pin to release, and the attachment point to open, which could lead to serious injury or death.

We ask that you replace the metal D-ring and the screws on the gated ventral attachment point (using the replacement kit made available to you).

All ASTRO and CANYON GUIDE harnesses with serial numbers below 23J 9999999 999 are affected by this replacement (same scope as the harnesses covered by our 2023 call for inspection).
NB : The latest versions of the ASTRO and ASTRO SIT, sold since February 2025, are not affected by this safety alert.

To check whether you are affected by this replacement, use the tool below:

Click here to get redirected to the tool.

Contact your local Petzl after-sales service via the after-sales service section of the contact form to get a replacement kit (D-ring and screws) suitable for the gated ventral attachment point of your harness. The kit will be sent to you free of charge, with the associated installation instructions.

Case A: shackles are installed on your harness (possible only on ASTRO harnesses). You may continue to temporarily use your harness until the parts are replaced.

ASTRO BOD FAST harnesses, European version: C083AA00, C083AA01, C083AA02 (serial number less than 23J 9999999 999)

ASTRO BOD FAST harnesses, International version: C083BA00, C083BA01, C083BA02, C083BA03, C083BA04, C083BA05 (serial number less than 23J 9999999 999)

ASTRO SIT FAST harnesses,: C085AA00, C085AA01, C085AA02 (serial number less than 23J 9999999 999)

CANYON GUIDE harnesses: C086BA00 and C086BA01 (serial number less than 23J 9999999 999) 

Is this replacement mandatory?
Yes, and we ask that you carry out the replacement as soon as you receive the kit.

How long does it take to get a replacement kit?
Once you place your order, we will normally ship it within one week.

My harness has been inspected and is compliant, and has a green sticker from the 2023 call for inspection: should I carry out the replacement?
Yes, and we ask that you carry out the replacement as soon as you receive the kit.

Why are ASTRO/CANYON GUIDE harnesses manufactured after October 2023 not affected by this replacement?
Following the 2023 safety alert, we took corrective action in the production of the metal D-ring.

My ASTRO/CANYON GUIDE harness is not affected by this safety alert, but I have noticed wear on the screws of the gated attachment point: what should I do?
Contact us to get replacement screws.

Have there been any injuries associated with this issue?
No, to date, we are not aware of any injuries associated with this non-conformity.

For more information of this safety warning, please visit the: webpage of Petzl or contact us.